10/100M 1SFP+1RJ45 Ports Ethernet Fiber Media Converter
10/100M 1SFP+1RJ45 Ports Ethernet Fiber Media ConverterThis series media converters are designed to meet the massive needs for gigabit network deployment and able to extend a copper based gigabit network via fiber cable to a maximum distance up to 80KM.
These fiber converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed into a standard converter Chassis. The installation & operation procedures are simple & straightforward. Operation status can be locally monitored through a set of diagnostic LED located in the front panel.
|Data Rate: 10/100M||Wavelength:850nm/1310nm/1550nm|
|Fiber Types:Singlemode/Multimode||Color: Black (Grey, Others available)|
|Connector Type: SC Ports (LC, ST, FC optional)||Interface Type:SFP, RJ45 Port|
|Storage Temperature: -20 ~ 70°C||Operating Temperature: 0 – 50°C|
|Transmission Mode: Half duplex or full duplex||Transmission Distance:10KM~80KM|
- Standard : IEEE 802.3z & 802.3ab
- Interface: 1 x RJ-45 connector / 1 x SFP Slot
- MDI/MDIX Auto-Crossover supported
- LED: Power , DUP,FP-LINK,RX,1000,TX
- Plug-and-Play installation
- Support Jumbo Frame (64-9216 Byte)
- Support Voltage Monitor
- Gigabit Ethernet Network Distances
- It use the 10/100BASE-T to 100BASE-X speed setting (back-to-back) to extend the distance between two 100BASE-T devices up to 80km, using single mode fiber without a repeater.